HOME | TILE BY MATERIAL | PORCELAIN FLOOR AND WALL TILE | DUNE
dune images

dune porcelain tile
The Dune series is a glazed porcelain tile with smooth surfaces and straight edges. Using sandstone as an inspiration for this series, the authenticity of each stone striation is the result of the latest inkjet technology.
beige
Beige (CGDEBE) PEI V

noce
Noce (CGDENE) PEI IV

taupe
Taupe (CGDETE) PEI IV

PRODUCT INFORMATION
SIZES
12 x 12
 CGDE--/1212  
18 x 18 CGDE--/1818  
12 x 24 CGDE--/1224  
2 x 2 Mosaic CGDE--/22 (Mounted on a 12 x 12 sheets)

COLORS
Beige
Noce
Taupe 		CGDEBE
CGDENE
CGDETE
  

TRIM
The surface bullnose is made from field tile that is cut, ground and reglazed.
Surface Bullnose 3 x 12 CGDE--/SBN

COORDINATING TRIM
Expect variation in color and size between field and trims.
12" Quarter Round
CGDE--/A112
Beak CGDE--/AC112

DUNE PHOTO GALLERY
dune images
TESTING
Coefficient of Friction: ≥ 0.60 ASTM C 1028-07
The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs. As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed. For more information see our current handout Americans with Disabilities Act and Slip Resistance of Tile.

USAGE & INSTALLATION
Suitable for both residential and moderate commercial installations - floor, wall and counters. There are slight differences in thickness between the different sizes. These differences can usually be worked out by the installer.

Back to Top

Previous Page