Focus - Italian colored-body porcelain stoneware

HOME | TILE BY MATERIAL | PORCELAIN FLOOR AND WALL TILE | FOCUS

Italian colored-body porcelain stoneware tile series. Suitable for residential and commercial applications.

TRIM
SIZES
12 x 12 (8mm thick)	ACFS--/1212
18 x 18 (9mm thick)	ACFS--/1818
12 x 24 (9mm thick)	ACFS--/1224
COLORS
Focus Avorio (Ivory)	ACFSAO
Focus Dorato (Gold)	ACFSDO
Focus Cenere (Grey)	ACFSCE •
Focus Grafite (Black)	ACFSGE *
•20% Recycled Ceramic Content Pre-consumer This product can be used to earn LEED MR credits 4.1
*40% Recycled Ceramic Content Pre-consumer This product can be used to earn LEED MR credits 4.2
The surface bullnose is made from field that is cut, ground and reglazed.
3 x 18 Surface Bullnose	ACFS--/SBN
COORDINATING TRIM
Available in all colors except Grafite. For coordinating trims for Grafite try Supergres Ambienti Nero (SSAINO.) Expect variation in color and size between field and trims.
12" Quarter Round	ACFS--/A112
Beak	ACFS--/AC112
12" Finger Cove	ACFS--/C112

FOCUS TILE PHOTO GALLERY

TESTING

The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs. As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed. For more information see our current handout Americans with Disabilities Act and Slip Resistance of Tile.
USAGE & INSTALLATION
Suitable for residential and commercial applications - floor, wall and counters. NOTE: When installing patterns please note that different sizes are different thicknesses. The thickness difference can usually be worked out by the installer.