HOME | TILE BY MATERIAL | PORCELAIN FLOOR AND WALL TILE | STROBUS
strobus wood tile

The wood-look glazed porcelain of STROBUS is the perfect choice for modern or classic interiors. This porcelain reproduction of wood planks is achieved by combining the latest inkjet technology with the 6-1/2 x 40 inch size of each tile.
sand
Sand (IASSSD) G1
rosso
Rosso (IASSRO) G2
beige
Beige (IASSBE) G1

PRODUCT INFORMATION
SIZES
6 1/2 x 40
 IASS--/640



COLORS
Group 1
IASSBE
IASSSD		 Beige
Sand

Group 2
IASSRO Rosso

STROBUS TILE PHOTO GALLERY
strobus wood tile
INSTALLATION
Before installing the tile you should:

• Ensure the perfect planarity (flatness) of underlying floor base.

• Always double-check the quality of the tiles.

• When setting, tile should be only slightly staggered so that the ends of the tiles are 8" or less from the ends of the corresponding staggered tile. (See figures 1 and 2).

• Always leave a joint of at least 2mm between tiles.

• Use preferably a grouting material that matches the color of the tiles.


The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs. As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed. For more information see our current handout Americans with Disabilities Act and Slip Resistance of Tile.

Back to Top

Previous Page