HOME | TILE BY MATERIAL | PORCELAIN FLOOR AND WALL TILE | PALAIS


palias contemporary tile

Palais is a contemporary, linear look in glazed porcelain. The linear pattern is the same on each tile. When installing, the pattern is directional and will "line up" when pieces are set the same direction. For a different design effect the tiles may be turned when installing.

 

  white tile grey tile beige tile taupe tile
  Palais White (EEPSWE) Palais Grey (EEPSGY) Palais Beige (EEPSBE) Palais Taupe (EEPSTE)



TILE PRODUCT INFORMATION
SIZES
12 X 24

EEPS--/1224
COLORS
Palais Beige
Palais White
Palais Grey
Palais Taupe
EEPSBE
EEPSWE
EEPSGY
EEPSTE

TRIM
1/2 X 12 Round Stop EEPS--/RS
1/2 X 1/2 Corner Round Stop EEPS--/RSN

USAGE & INSTALLATION
Palais is suitable for walls, counters and residential to light duty commercial floors.

PHYSICAL CHARACTERISTICS

** These results are for the natural finish and for the normal productions; if there is concern about a particular production, it should be tested. The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs.

As noted in the Americans with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed. For more information see our current handout Americans with Disabilities Act and Slip Resistance of Tile.




Previous Page