SIZES 2 X 2 VOAP--/22 (Sheet-mounted) 2 X 2 sheet = approx. 8” x 8”
1 X 2 VOAP--/12 (Sheet-mounted, broken joint) 1 X 2 sheet = approx. 7.2” x 7.2
Appia is face-mounted
with a plastic
film that is removed after the tile
has been installed and the adhesive
has set. The film application process
slightly enhances the translucence
of the glass.
USAGE Suitable for walls and light duty floors, but is still susceptible to some scratching.
PRODUCT INFORMATION Glass can vary within each run and from production run to production run. Glass tile may be susceptible to scratching in handling and installation, as well as use. Make sure that during installation the tile does not become dirty with grout residue or setting materials. If this should happen, immediately clean the affected area with a sponge, and do not use abrasives, alcohol, acids or solvents. Brochure colors are intended as a guide only and may vary from actual tile. Please check tile samples before making final selections.
* Setting Guidelines Glass requires special installation: only use white adhesive with high adhesion and elasticity which are especially recommended for installing glass. For complete coverage and to avoid trowel marks, we recommend back-buttering. All substrates should be properly reinforced to be sure that there is no movement. For mortar installations, the mortar bed has to be cured (less than 2% humidity) and has to have proper reinforcing. Please refer to the TCNA handbook for specific information regarding installation of glass tile.
