Floor Gres Floortech | Italian Porcelain Tile
With Floortech, Floor Gres brings the quality of a technical Italian full-body porcelain to the stone-look. Each color represents a different, popular stone. All four stone colors are available in the “Soft Finish” which looks and feels like a honed stone. Like real stone, the Soft Finish will vary in surface texture depending upon the stone color. Suitable for both commercial and residential installations.
Floortech 1.0
Floortech 2.0
Floortech 7.0
Floortech 9.0
Colors, Sizes & Trim
| Colors | |
|---|---|
| FGFH1S | 1.0 (White Tuff) |
| FGFH2S | 2.0 (Ivory Thala) |
| FGFH7S | 7.0 (Jura Grey) |
| FGFH9S | 9.0 (Basaltina Nero) |
| Sizes | |
| FGFH-S/1224 | 12 x 24 |
| FGFH-S/22 | 2 x 2 Mosaic |
| Trim | |
| FGFH-S/SBN224 | 2 x 24 Surface Bullnose |
Additional Information
Trim
The factory is switching to 2 x 24 Surface Bullnose from the current 3 x 24 Surface Bullnose. This change will occur color by color over a period of time. If there is a concern about a particular order (i.e. a job continuation) please contact us to find out which version we currently have.
Surface Bullnose is made from field tile that is cut, ground and reglazed.
Installation Information
Most Italian manufacturers recommend a maximum offset of 8” (20cm) on all large format tiles when setting running bond. Please refer to ANSI requirements for setting large format tiles ANSI A108.02 Section 4.3.8.
There are special setting requirements and materials for large format tiles. Please refer to the TCNA Handbook and guidelines by your mortar manufacturer for more information.
Usage
Floortech Series is suitable for both residential and commercial installations.
Non-Stock Sizes
The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs. As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.