Floor Gres Geotech | Italian Porcelain Tile
The island of Madeira, which means wood in Portuguese, belongs to an archipelago of volcanic origin which features a special stone that has the appearance of fossil wood. This is the inspiration for Geotech. Combining fine porcelain stoneware with patterns of natural stone with new, original combinations of color and surface textures. Geotech can meet all the requirements of modern architecture.
Geo Gray Natural
Geo Gray Structured
Geo White Natural
Geo White Structured
Colors, Size & Trim
| Colors | ||
|---|---|---|
| FGGHWE | Geo White | |
| FGGHGY | Geo Grey | |
| Size & Finishes - Rectified | ||
| FGGH--N/1224 | 12 x 24 Natural | |
| FGGH--S/1224 | 12 x 24 Structured | |
| Trim - Natural Finish Only | ||
| FGGH--N/SBN | 4 x 24 Surface Bullnose | |
| FGGH--N/SBN224 |
2 x 24 Surface Bullnose | |
Additional Information
Colors
Available in both finishes.
Trim
The Surface Bullnose is changing size, from 4 x 24 to 2 x 24. Please be aware of this change. If there is a concern about a particular order (i.e. job continuation) please contact us to find out which version we currently have.
Available in Natural Finish only. Surface Bullnose is made from field that is cut and ground.
Non-Stock Size
Subject to minimum order quantities.
Usage & Installation
Geotech is suitable for both residential and commercial installations.
Most Italian manufactures recommend a maximum offset of 8” (20cm) on all large format tiles when setting large format tiles, ANSI A 108.2 Section 4.3.8. There are special setting requirements and materials for large format tiles. Please refer to the TCNA Handbook and guidelines by your mortar manufacturer for more information.
As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.