Floor Gres Styletech Metal | Italian Porcelain Tile
Fusing the urban industrial feeling with the imagery of foundry metals, Floor Gres created the authenticity of a metal-look tile in three colors through their digital technology, while offering the durability and ease of maintenance of a porcelain tile. The honed surface of the “Soft” Finish adds extra richness to the three colors. Suitable for both commercial and residential installations.
Metal 01
Metal 02
Metal 03
Colors, Sizes & Trim
| Colors | ||
|---|---|---|
| FGSM1S
| Metal 01 (Dk. Steel Grey) | |
| FGSM2S | Metal 02 (White) | |
| FGSM3S | Metal 03 (Lt. Grey) | |
| Sizes - Rectified | ||
| FGSM-S/1632 | 16 x 32 | |
| FGSM-S/2448 | 24 x 48 | |
| FGSM-S/3271 | 32 x 71 | |
| FGSM-S/22 | 2 x 2 Mosaic | |
| Trim | ||
| FGSM--S/SBN | 2 x 24 Surface Bullnose | |
Additional Information
Images
Sizes
Stocked in Soft Finish (Honed) - R9.
24 x 48 & 32 x 71 Size Handling Information: Due to the special packing required for the large format tiles, orders for the 24 x 48 and 32 x 71 size must be for full box quantities only and we are not able to fill orders on the same day as placed.
Trim
Surface Bullnose is made from field tile that is cut, ground and reglazed.
Usage & Installation
Styletech Metal Series is suitable for both residential and commercial installations.
Most Italian manufacturers recommend a maximum offset of 8” (20cm) on all large format tiles when setting running bond. Please refer to ANSI requirements for setting large format tiles ANSI A108.02 Section 4.3.8.
There are special setting requirements and materials for large format tiles. Please refer to the TCNA Handbook and guidelines by your mortar manufacturer for more information.
It is important to mix tiles within each carton and blend from several cartons to get a proper balance of variation.
Non-Stock
The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs.
As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.