Galileo Symphony | Porcelain Wall Tile
Like a symphony, each color in this series is a complex blend of different tones - some of the colors have a classic and gentle mood, while other colors create a more dynamic and dramatic feeling.
GOSY 21
GOSY 22
GOSY 25
GOSY 26
GOSY 38
GOSY 39
Colors, Sizes & Trim
| Colors | |
|---|---|
| GOSY21 | Symphony 21 |
| GOSY22 | Symphony 22 |
| GOSY25 | Symphony 25 |
| GOSY26 | Symphony 26 |
| GOSY38 | Symphony 38 |
| GOSY39 | Symphony 39 |
| Size | |
| Non-Rectified | |
| 6 x 6 | GOSY--/66 |
| Coordinating Trim | |
| 1/2 x 12 Surface Bullnose | GOSY--/112SBN |
Usage
Symphony is intended for walls. Since it is porcelain, it may be suitable for some residential floors with very light traffic but, as with all glossy glazes, it can be slippery and is subject to scratching.
Coordinating Trim
Expect variation in color and size betwen field and trims. There is limited shade variation on the pencil bullnose; the shading is more uniform that the field tile.
Installation
Symphony is intended for walls. Since it is porcelain, it may be suitable for some residential floors with very light traffic but, as with all glossy glazes, it can be slippery and is subject to scratching. It is important to work with the layout, mixing pieces within each carton and pulling from several cartons, to get the proper blend during installation. Due to the different production techniques and times, expect variation in size and color between field and trim.
The minimum recommended grout joint is 3/32”. Please note that the material is non-rectified. If using more than one item together, please check the caliber and be aware that you may have to adjust the size of the grout joint to makeyour pattern work.
Due to the nature of this special material, orders must be for full boxes only. Please note that we do not acceptreturns in general. In the rare occurrence that we make an exception and do take a return of this product, only factory sealed full boxes can be accepted.
As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.