Fly Zone Reverse | Italian Porcelain Tile
Reverse is inspired by the architectural trend of installing stone tiles with the back side facing out. The reverse side of the stone has a different character and brings a fresh perspective to stone-look porcelain. This high-quality, Italian, inkjet glazed porcelain in today’s popular colors is offered at a competitive price. It is suitable for residential and moderate commercial use. It is available in 3 colors with coordinating surface bullnose trim.
Colors, Size & Trim
|FZRE--/1224||12 x 24|
|FZRE--/SBN||4 x 24 Surface Bullnose|
The surface bullnose is made from field tile that is cut, ground and reglazed.
Usage & Installation
Reverse is suitable for use on walls, counters and residential to moderate duty commercial floors.
Most Italian manufacturers recommend a maximum offset of 8” (20cm) on all large format tiles when setting a running bond. Please refer to ANSI requirements for setting large format tiles ANSI A 108.2 Section 4.3.8.
The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs.
As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed. For more information see our current handout Americans with Disabilities Act and Slip Resistance of Tile.