Verde 1999 Blast | Italian Porcelain Tile
Verde 1999 employs graphics from different stones and concrete, mixing them together to create the crossover contemporary/classic look for the Blast series. Both sizes of this colored-body inkjet porcelain are rectified. It is important to blend tiles within each carton, and from different cartons during installation to insure a proper range of variation.
Blast Antracite
Blast Bianco
Blast Grigio
Blast Taupe
2 x 2 Mosaic
Blast Antracite
Blast Bianco
Blast Grigio
Blast Taupe
1 x1 Mosaic Blend
Mosaic Blend
Colors, Sizes & Trim
| Colors | ||
|---|---|---|
| VEBTAE | Blast Antracite | |
| VEBTBO | Blast Bianco | |
| VEBTGO |
Blast Grigio | |
| VEBTTE | Blast Taupe | |
| Sizes - Rectified | ||
| VEBT--/1224 | 12 x 24 | |
| VEBT--/624 | 6 x 24 | |
| Mosaics | ||
| VEBT--/22 | 2 x 2 | |
| VEBT/11 | 1 x 1 Mosaic Blend | Trim |
| VEBT--/SBN | 3 x 24 Surface Bullnose | Coordinating Trim |
| VEBTBO/A112 | 12” Quarter Round | |
| VEBTBO/AC112 | Beak | |
Additional Information
1 x 1 Mosaic Blend
Mosaic is a blend of all four colors and mounted on approx. 12 x 12 sheets. Sheets can be used as field or cut to create feature strips.
2 x 2 Mosaic
Available in all colors and mounted on approx. 12 x 12 sheets. Sheets can be used as field or cut to create feature strips.
Trim
The surface bullnose is made from field tile that is cut and ground. Available in all colors.
Coordinating Trim
Available in Bianco (BO) color only. Expect variation in color and size between field and trims.
Non-Stock
For projects that meet minimum quantities.
Usage & Installation
Suitable for residential and commercial installations.
Most Italian manufacturers recommend a maximum offset of 8” (20cm) on all large format tiles when setting running bond. Please refer to ANSI requirements for setting large format tiles ANSI A108.02 Section 4.3.8.
As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.