THIS PRODUCT IS BEING PHASED OUT BY THE FACTORY. PLEASE CHECK AVAILABILITY.

chillon

Chillon

howard

Howard

kilkenny

Kilkenny

saint michel

Saint Michel


Colors, Sizes & Trim

Colors  
ESCSCN Chillon  (Cream)
ESCSHD Howard (Beige)
ESCSKY Kilkenny (Light Grey)
ESCSSM Saint Michel  (Medium Grey)
Sizes  
Non-Rectified
Sold by the FULL CARTON only.
The Modular Pattern is a mix of 8 x 8, 8 x 16, 16 x 16 & 16 x 24 packed together. Each carton has 2 pieces 8 x 8, 1 piece 8 x 16, 2 pieces 16 x 16 and 1 piece 16 x 24.
Trim  
ESCS--/SBN 2-1/2 x 24 Surface Bullnose

Usage & Installation

Castle Stone is suitable for use residential floors and light commercial applications.

IMPORTANT NOTE: The Modular Pattern is a non-rectified material. The sizes are designed to work together in the pattern with an average 1/8” grout joint. While it is intended to be installed as a pattern, the grout joints may not be perfectly uniform and the installer may have to make adjustments during installation, making some joints smaller and some joints larger, rather than relying on spacers.

Please note that the individual sizes are not available separately, so it is important to use each piece as it was intended to make the pattern (for example, not using the 8x8 pieces instead of cutting an 8x16) to avoid having to purchase excess material tocomplete the project.

It is important to mix the pieces to get the right shading as well as get the pattern right. Please note that we do not accept returns in general. In the rare occurrence that we make an exception and do take a return of this product, only factory sealedboxes can be accepted.

Modular Pattern

The Modular Pattern is a mix of 8 x 8, 8 x 16, 16 x 16 & 16 x 24 packed together. Each carton has 2 pieces 8 x 8, 1 piece 8 x 16, 2 pieces 16 x 16 and 1 piece 16x 24. Below are examples of patterns that can be created.

modular pattern

Non-Stock Item - Textured Finish

FOR PROJECTS THAT MEET MINIMUM QUANTITIES

special_order

Non-Stock prices are subject to change and should be reconfirmed at time of order. Available in all colors.

Made in Italy
testing
The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs.

As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.