Segesta

Colors, Size & Trim

Colors  
GIMDBE
Beige
GIMDIY
Ivory
GIMDMD
Mud
Sizes - Rectified  
GIMD--/1212 12 x 12
GIMD--/1224 12 x 24
GIMD--/2436 24 x 36*
Mosaic  
GIMD--/44 4 x 4
Deco  
GIMD/1212D 12 x 12 Decoro**
GIMD/3HXD 3" Hex Mosaic Decoro
Trim  
GIMD--/SBN 2 x 24 Surface Bullnose

Additional Information

Please Note

It’s never advisable to select tile from images alone, especially when viewed on a screen since they can look different on different kinds of screens. Pictures are provided to give an idea of the look and variation. Colors are intended as a guide only and may vary from actual tile. Sizes listed are nominal. Please check samples before making final selection and to get actual dimensions for layout.

Ordering Information - 24 x 36

*Due to the special packing required for the large format tiles, orders for the 24x36 size must be for full box quantities only & we are not able to fill orders on the same day as placed.

Decoro

**The 12x12 Decoro has subtle floral patterns that are designed to go with all 3 field colors. There are 6 different patterns with 4 versions of each pattern that are faded as if worn off over time - with some are worn more and some are worn less - for a total of 24 faces. The deco patterns are mixed and sold randomly.

Due to the nature of this special material, orders for the 12x12 Decoro must be for full boxes only. Please note that we do not accept returns in general. In the rare occurrence that we make an exception and do take a return of this product, only factory sealed full boxes can be accepted.

Trim

The surface bullnose is made from field tile that is cut, ground and reglazed.

Usage and Installation Information

Mood is suitable for residential and light to moderate commercial applications. To attain the proper mix of graphics and color, it is important to pull from multiple boxes during installation, rotate pieces, and note the placement of the different images to get the proper final blend. 

Most Italian manufacturers recommend a maximum offset of 8” (20cm) on all large format tiles when setting a running bond. Please refer to ANSI requirements for setting large format tiles, ANSI A 108.2 Section 4.3.8. There are special setting requirements and materials for large format tiles. Please refer to the TCNA Handbook and guidelines by your mortar manufacturer for more information.

planks
 
lfaa testing

The Dynamic Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs. As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.


Tileshop
Berkeley . San Jose . Van Nuys
©2017 Tileshop Inc.