THIS PRODUCT IS BEING PHASED OUT. PLEASE CHECK AVAILABILITY.

Bruciato

Bruciato

Naturale

Naturale

SbiancatoSbiancato

Colors, Sizes & Trim

Colors  
SIPBBO Bruciato
SIPBNE Naturale
SIPBSO Sbiancato
Sizes  
Non-Rectified
6-1/2 x 16 (R10) SIPB--/716
3-1/4 X 16 (R10) SIPB--/316
Grip Finish  
6-1/2 x 16 Grip (R11 B) SIPBNEG/716
Trim  
3 x 16 Surface Bullnose SIPB--/SBN

Grip Finish

The 6-1/2 x 16 Grip is only available in Naturale (NE) color only.

With its R11 B rating, the Grip Finish is suitable for many exterior paving applications including patios, pool decks, walkways, terraces, steps, and even some slopes. Of course, final suitability always comes down to the specific circumstances of the project, and proper cleaning and maintenance is required to maintain the slip resistance of any surface. A seamless flow from interior to exterior spaces can be created by using the natural finish inside and the grip finish outside.

Installation Information

It is important to work with the layout, mixing pieces within each carton and pulling within each carton and pulling from several cartons, to get the proper blend during installation.

The minimum recommended grout joint is 1/8”. It is important to wash down the grout to reveal the chiseled edges. Please note that the material is non-rectified. If using more than one item together, please check the caliber and be aware that you may have to adjust the size of the grout joint to make your pattern work.

Usage

Pavé Brick is suitable for walls and floors, from residential to moderate commercial applications.
Made in Italy

 Download Product Sheet

testing
The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs.

As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.