lazio

Lazio (ESTELO )

 

toscana

Toscana (ESTETA )

 

marche

Marche (ESTEME )

8-1/2” Hex

lazio hex

Lazio (ESTELO/9HX )

 

toscana hex

Toscana (ESTETA/9HX )

 

grey

Marche (ESTEME/9HX )

8 x 8 Decoro

grey

Decoro A  (ESTE/88A)

 

grey

Decoro B  (ESTE/88B)

 

grey

Decoro C (ESTE/88C)

Deco

grey

Deco  (ESTE/9DHX)


Colors, Sizes & Trim

Colors  
ESTELO Lazio
ESTEME Marche
ESTETA Toscana
Size  
Non-Rectified
ESTE--/1616 16 x 16
ESTE--/816 8 x 16
ESTE--/88 8 x 8
ESTE--/9HX 8-1/2” Hex*
Deco  
ESTE/88A 8 x 8 Decoro A
ESTE/88B 8 x 8 Decoro B 
ESTE/88C 8 x 8 Decoro C
ESTE/9DHX 8-1/2” Hex*
Trim  
ESTE--/SBN 3 x 16 Surface Bullnose

Trim

The surface bullnose is made from field tile that is cut, ground and reglazed.

Hex & Deco*

Due to the nature of this material and small carton size, orders for the 8-1/2” Hex and Deco must be for full boxes only. Please note that we do not accept returns in general. In the rare occurrence that we make an exception and do take a returnof this product, only factory sealed full boxes can be accepted.

Traditional Maioliche patterns in white and blue glazes are laid over the 3 terracotta base colors. Then the patterns are faded as if worn off over time. The 7 different patterns each appear on multiple pieces - some are worn more and some are worn less - for a total of 41 faces. The deco patterns are mixed and sold randomly.

Made in Italy

Installation Information

There is a wide range of variation with many different graphics thar are mixed & packed randomly. It is important to pull from multiple boxes during installation, rotate pieces, and note the placement of the different images to get the proper final blend. 

 The minimum recommended grout joint is 3/32”. Please note that this material is non-rectified. If using multiple colors together, please check the caliber and be aware that you may have to adjust the size of the grout joint to make your pattern work.

 

Usage

Terre Etrusche is suitable for residential to moderate commercial applications.

 

*Note: Elios has multiple production facilities in the Europe. They develop their own original designs in Italy and then produce them at the factory that is most advantageous for making a particular size. In the Terre Etrusche line, this means the Hexagon is produced in their facility in Spain while everything else is produced in Italy. 

Made in Italy
testing
The Dynamic Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs.

As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.