Travertine Beige

Travertine Beige


Colors & Sizes

Color  
MOTNTB Travertine Beige
Sizes - Rectified  
MOTNTB/1224 12 x 24
MOTNTB/2424 24 x 24
MOTNTB/22 2 x 2 Mosaic
Trim  
MOTNTB/SBN 2 x 24 Surface Bullnose

Images

Additional Information

Trim

The surface bullnose is made from field tile that is cut, ground and reglazed.

Usage

Tradition is suitable for residential and moderate commercial use.

Installation

It is important to blend tile within each carton and from multiple cartons during installation, as well as changing the orientation of pieces with similar graphics to attain a proper mix. Most Italian manufacturers recommend a maximum offset of 8” (20 cm) on all large format tiles when setting a running bond. Please refer to ANSI requirements for setting large format tiles, ANSI A 108.2 section 4.3.8. Using a leveling system can improve the installation of this product.

Non-Stock

non-stock

testing

** These results are for the natural finish and for the normal productions; if there is concern about a particular production, it should be tested. The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs.
As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.