beige

Beige (Natural and Reeded)  

 ivory

Ivory (Natural and Reeded)  

 mud

Mud  (Natural and Reeded)  

 taupe

Taupe (Natural and Reeded)  

Mosaic Surfaces

 mosaic surfaces

Beige 

 

 mosaic surfaces

Ivory

 

 mosaic surfaces

Mud

 

 mosaic surfaces

Taupe


Colors, Sizes & Trim

Colors  
GIVNBE
Beige
GIVNIY Ivory
GIVNMD
Mud
GIVNTE Taupe
Sizes - Rectified
GIVN--/1224 12 x 24 Natural
GIVN--/1224R 12 x 24 Reeded
GIVN--/2448 24 x 48 Natural*
Trim
GIVN--/SBN 2 x 24 Surface Bullnose
Mosaics
GIVN--/44 4 x 4 Mosaic
GIVN--/MS Mosaic Surfaces

Additional Information

Please Note

It’s never advisable to select tile from images alone, especially when viewed on a screen since they can look different on different kinds of screens. Pictures are provided to give an idea of the look and variation. Colors are intended as a guide only and may vary from actual tile. Sizes listed are nominal. Please check samples before making final selection and to get actual dimensions for layout.

Sizes

*Due to the special packing required for the large format tiles, orders for the 24x48 size must be for full box quantities only and we are not able to fill orders on the same day as placed.

Trim

Available in Natural Finish only. The surface bullnose is made from field tile that is cut, ground and reglazed.

Mosaic Surfaces

The Mosaic Surfaces has multiple sizes in Natural and Reeded finishes that are mixed and mounted in sheets.

Usage & Installation

Venetian is suitable for residential and light to moderate commercial applications.

Most Italian manufacturers recommend a maximum offset of 8” (20cm) on all large format tiles when setting a running bond. Please refer to ANSI requirements for setting large format tiles, ANSI A 108.2 Section 4.3.8. Using a leveling system can improve the installation of this product.

To attain the proper mix of graphics and color it is important to pull from multiple boxes during installation, rotate pieces, and note the placement of the different images to get the proper final blend.

italyitalyitaly
testing
The Dynamic Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs.

As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.