Original Grigio B

Original Grigio B

Original Grigio C

Original Grigio C

Original Grigio D

Original Grigio D

Original Light Blue B

Original Light Blue B

Original Taupe C

Original Taupe C

Nordic A

Nordic A

Nordic C

Nordic C

Etnic Nero C

Etnic Nero C

Etnic Light Blue B

Etnic Light Blue B

Etnic Black & White B

Etnic Black & White B


Colors, Sizes & Trim

8 x 8  Field Color - Non-Rectified  
ESDAWE/88 White
8 x 8 Decos - Non-Rectified  
ESDAEC/88BWB Etnic Black & White B
ESDAEC/88LBB Etnic Light Blue B
ESDAEC/88NC Etnic Nero C
ESDANC/88A Nordic A
ESDANC/88C Nordic C
ESDAOL/88GB Original Grigio B
ESDAOL/88GC Original Grigio C
ESDAOL/88GD Original Grigio D
ESDAOL/88LBB Original Light Blue B
ESDAOL/88TC Original Taupe C
Coordinating Trim  
ESDAWE/SBN 2 - 1/2 x 8 Surface Bullnose

Images

Usage and Installation

Deco is suitable for walls and floors including residential and moderate commercial use. Please note that some patterns are complete within a single piece of tile while others need four tiles to complete each pattern. For the designs that require four pieces, Original Grigio C, Original Taupe C, Etnic Light Blue B & Etnic Black & White B, care should be taken during installation to make sure the tiles are correctly placed to achieve the desired final look. The minimum recommended grout joint is 3/32”. Please note that the material is non-rectified. If using more than one item together (i.e. field and decos), please check the caliber and be aware that you may have to adjust the size of the grout joint to make your pattern work.

Trim

Expect shade variation between field and bullnose.

Decos

Original C (ESDAOL/88TC & ESDAOL/88GC ) needs 4 pieces to complete each pattern.

Nordic C (ESDANC/88C) can be set many ways. In fact, the orientation of the pieces can create quite different effects. It is important and recommended that you orient the pieces the way you want them in a dry layout before installation.

Made in Italy Made in Italy
testing
The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs.

As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed.